Jack Miller's Red Bull KTM Ajo machine
© David Robinson
MotoGP

Take a look around Jack Miller’s Moto3 machine

All the details you need to know about the Moto3 Championship leader’s Red Bull KTM Ajo bike.
By David Robinson & Joseph Caron Dawe
3 min readPublished on
The Red Bull KTM Ajo RC250GP

The Red Bull KTM Ajo RC250GP

© David Robinson

Jack Miller and his KTM RC250GP machine are currently the combination to beat in Moto3 at the moment.
The young Australian has taken the Championship by storm in 2014. So far he's won three of the six rounds to date, and leads the overall standings by five points heading into the Catalonia GP.
Ahead of Round 7 RedBull.com got a close up look at the Red Bull KTM Ajo Motorsport rider's set-up, to see just what goes into powering a top Moto3 motorcycle.
The engine is encased in the steel frame

The engine is encased in the steel frame

© David Robinson

The Engine
A liquid cooled four-stroke, 250cc, single cylinder DOHC engine powers Miller's KTM. Despite being the smallest category in the World Championship the Moto3 bikes can shift, with the KTM making 0-100kph in less than three seconds and reaching top speeds of up to 235kph.
The engine peaks at around 50bhp, maxing out at 13,000rpm and squeezing 28nm of torque out of a relatively lightweight combination of bike (82kg) and rider (60kg).
Jack Miller's Red Bull KTM Ajo machine

Jack Miller's Red Bull KTM Ajo machine

© David Robinson

Rigid but flexible, light and nimble: The KTM

Rigid but flexible, light and nimble: The KTM

© David Robinson

Flying along the straight at Mugello

Flying along the straight at Mugello

© GEPA/Gold & Goose

The Chassis and Fairing
Lightweight steel forms the basis of the frame that makes up the chassis, helping the bike to stay rigid but agile at the same time, and carbon fibre is the material of choice for the fairing which helps to protect everything that lies beneath it while keeping the bike as aerodynamic as possible.
Mission control: The bike's control panel

Mission control: The bike's control panel

© David Robinson

The Electronics
A sophisticated traction control system helps to keep rear wheel spin in check and is accessible via the bike's control panel. The launch control also helps to keep the bike grounded when accelerating from a standing start, as all that power can pack a punch, and the bike's pre-mapped settings can all be selected by Miller through the DellOrto electronics system.
Magnesium wheels and Dunlop tyres keep it on track

Magnesium wheels and Dunlop tyres keep it on track

© David Robinson

Wheels and Tyres
The OZ racing wheels are cast from aluminium-magnesium and are shod in Dunlop tyres. The photo above shows a set of rain tyres, which bear deep grooves to help displace the water from the track when it's wet, but in dry conditions smooth slicks are used.
The rear suspension is WP, just like the front

The rear suspension is WP, just like the front

© David Robinson

The Akrapovic exhaust is a thing of beauty

The Akrapovic exhaust is a thing of beauty

© David Robinson

Miller in action at the Americas GP

Miller in action at the Americas GP

© GEPA/Gold & Goose

Suspension, Brakes and Exhaust
WP suspension helps to make the ride as smooth as possible and absorbs whatever undulations the track has to throw at the bike, with the front taking up to 45mm and the rear adjustable according to the specific demands of each track.
Given that Miller frequently hits speeds in excess of 200kph, a solid set of brakes is more than necessary. Brembo is the brand of choice for many teams, including the majority of the MotoGP line-up, and dual piston callipers on the KTM clamp down onto a 190mm brake disc. Seeing as the front takes most of the strain when braking, the braking gear is doubled up compared to the rear of the bike.
The Akrapovic race exhaust system is top of the range and sculpted from titanium.
Miller tucks down in Argentina

Miller tucks down in Argentina

© GEPA/Gold & Goose

The KTM RC250GP: Fast Facts
Engine: Four-stroke, DOHC, 249.5cc, single-cylinder Power: 50bhp@13,000rpm Torque: 28 Nm@ 11,000rpm Transmission: Cassette-type six-speed gearbox Electronics: Adjustable traction control, launch control, fuel mapping, ignition mapping, pit lane limiter, interface for data recording Chassis: Tubular steel with carbonfibre subframe, adjustable swingarm pivot Suspension: WP fork and shock, adjustable for preload, compression damping and rebound damping (separate adjustments for high- and low-speed damping) Brakes: Double 290mm discs (front) with radial-mount calipers, single 190mm disc (rear) with radial-mount caliper Wheels and tyres: 17-inch forged aluminium wheels, Dunlop slicks, 95/75-R17 (front), 115/75-R17 (rear) Fuel tank capacity: 10.5 litres Weight without fuel: 82kg Cost: €45,000
Want to experience the best of RedBull.com on the move? Get the app at RedBull.com/app.

Part of this story

2014 Grand Prix of Catalonia

High temperatures and a frenetic crowd make for a heady mix at the awesome Montmelo track!

Spain

Jack Miller

A race-winning MotoGP™ rider, Australia's Jack Miller has impressed ever since making the move directly from Moto3™ to the top class.

AustraliaAustralia